LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1686002.png)
9. Repeat the above procedure on the opposite hand.
10. 10. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
11. Remove both rear wheels and tires.
12. If installed, remove the rear suspension height sensor.
13. Remove the rear muffler.
14. 14. CAUTIONS:
-
Mark the position of the driveshaft flange in relation to the drive pinion flange.
-
To avoid damage to the joint or gaiter, do not allow the driveshaft to hang.
Discard the bolts.
15.
16. Repeat the above procedure on the opposite hand.
17.
