LR2 (LF) L6-3.2L (2008)
Rear Subframe Mount: Service and Repair
Rear Subframe Front Bushing
Uni-Body, Subframe and Mounting System - Rear Subframe Front Bushing
Removal and Installation
Special Tool(s)
Removal
-
NOTE: Removal steps in this procedure may contain installation details.
1. 1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove both rear wheels and tires.
3. Remove the rear subframe assembly for access.
4. 4. CAUTIONS:
-
Mark the components to aid installation.
-
Special tool 204-598-01/8 is used to start the bushing removal process, and must be removed after the bushing has released, as it will
not pass through the subframe bushing aperture.
Remove the bushing.
Special Tool(s): 204-598, 204-598-01
Installation
1. 1. CAUTIONS:
-
Make sure the correct special tool is used to install the bushings to the correct depth.
-
Make sure that the installation marks are aligned.
Install the bushing.
Special Tool(s): 204-598, 204-598-01