LR2 (LF) L6-3.2L (2008)
Brake Pad: Service and Repair
Front Brake Pads
Brake Pads
Service Repair No - 70.40.02
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the front wheels and tires.
3. Remove the brake pad spring clip.
4. Remove the 2 caliper guide pins.
5. CAUTION: Make sure that no load is placed on the brake hose.
Release the brake caliper.
6. Remove the brake pads.
7. Repeat the above procedure for the other side.
Installation
1. WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
CAUTION: Make sure that the mating faces are clean and free of foreign material and that no grease is applied to the brake pad guides.
Clean the brake caliper housing and anchor plate using brake cleaning fluid.