LR2 (LF) L6-3.2L (2008)
Brake Master Cylinder: Service and Repair
Brake Master Cylinder
Brake Master Cylinder
Removal
CAUTION: Extreme cleanliness must be exercised when handling these components.
CAUTION: If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Remove the brake fluid reservoir.
Right-hand drive vehicles
3. NOTE: Torque applies to bolt only.
Torque:
10 Nm
All vehicles
4. CAUTION: Be prepared to collect escaping fluids.
CAUTION: Make sure that all openings are sealed.
Torque:
15 Nm