LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-495001.png)
Accessory Shaft: Service and Repair
Accessory Drive Shaft Rear Seal
Accessory Drive Shaft Rear Seal
Special Service Tools
Removal
1. Remove the cover and disconnect the battery ground cable.
2. Remove the accessory drive pulley.
3. CAUTION: Discard the seal.
Installation
1. Install the seal to the special tool
Special Service Tools: Installer, Auxiliary Drive Seal
Remove the seal guide.
2. CAUTION: Make sure that the mating faces are clean and free of corrosion and foreign material.
Install the special tool and seal assembly into the accessory drive shaft.
Install the seal.
