LR2 (LF) L6-3.2L (2008)
11. Using the special tool, lock the camshaft drive sprockets.
Special Service Tools: Locking Tool, Camshaft Tool
12. Remove and discard the 2 camshaft sprockets bolts
13. Remove the sprockets and the chain.
Installation
1. Install the chain and the sprockets.
2. CAUTION: Do not tighten the camshaft sprocket bolts at this stage.
CAUTION: Make sure that new bolts are installed.
Install the sprocket retaining Torx bolts to the camshafts.
3. CAUTION: Make sure that the area around the component is clean and free of foreign material.
CAUTION: Extreme cleanliness must be exercised when handling these components.
Install the timing chain tensioner.
Torque:
10 Nm
4. Release the chain tensioner
5. Using the special tool, lock the camshaft drive sprockets.
Special Service Tools: Locking Tool, Camshaft Tool
6. Tighten the exhaust camshaft drive sprocket.
Torque:
Stage 1. 75 Nm