LR3/Disco 3
Rear support block dimensions
l
'A' = 152.0 mm (6.0 in)
l
'B' = 101.0 mm (4.0 in)
l
'C' = 76.0 mm (3.0 in)
Raising and Supporting the Vehicle
1. Position vehicle on ramp.
2. Position suspension in 'off-road' height.
3. Apply parking brake.
4. Raise ramp to desired height.
5. Align the wheel free longitudinals beneath the body frame longitudinals and position the support blocks beneath the
longitudinals in the positions shown.
6. Engage wheel free and lower ramp slowly until weight of vehicle rests on support blocks and road wheels are just clear
of ramp.
7. Ensure that the vehicle is correctly supported on all four support blocks, that blocks are still correctly positioned and are
in full contact with the body frame longitudinals.
8. Lower the ramp.
CAUTION: Ensure that the front and rear support blocks are correctly oriented to front and rear of
vehicle.
