LR3/Disco 3
NOTE:
Two Post Lift
1. Position the vehicle with the centre of the lift pillars aligned approximately with the front of the driver's/passenger's seat
cushions.
2. Extend the lifting arms and position the pad of each lifting arm beneath the body frame longitudinal lifting points.
3. Raise the vehicle until the wheels are just clear of the ground and check that the pads of each lifting arm are still
correctly positioned.
4. Raise the vehicle to the desired height.
5. Ensure that vehicle is correctly supported on all four lifting pads, that pads are still correctly positioned and are in full
contact with the body frame longitudinals.
WARNING: Make sure that the vehicle is stable before commencing work.
Return the suspension to 'normal ride height' when the vehicle is removed from the ramp.
CAUTION: If the drive shaft(s) are to be removed, release the parking brake and select NEUTRAL 'N' in
the main gearbox in order that the shaft(s) can be rotated when the vehicle is raised to the desired height.
WARNING: Make sure that the vehicle is stable before commencing work.
