LR3/Disco 3
9. Adjust the rear toe.
10. Adjust the front camber.
11. Adjust the front castor.
l
Loosen the toe link adjustment locking nut.
l
Rotate the toe link inner ball joint until the correct rear toe value is obtained.
l
Tighten the toe link adjustment locking nut to 130 Nm (96 lb.ft).
l
Repeat the above procedure for the other side.
l
Repeat the rear toe measurement.
l
Loosen the lower arm front camber adjusting bolt.
l
Rotate the front camber adjusting bolt until the correct value is obtained.
l
Tighten the lower arm front camber adjusting bolt to 275 Nm (203 lb.ft).
l
Repeat the above procedure for the other side.
