LR3/Disco 3 Front Suspension - Lower Arm (603502) | Page 143
Installation
1 .
Install the lower arm.
Fit the bolts but do not fully tighten at this stage.
2 .
Connect the shock absorber and spring assembly to the lower arm.
Tighten the nut and bolt to 300 Nm (221 lb.ft).
3 .
Release the halfshaft.
4 .
Using the special tools, install the halfshaft in the wheel hub.
5 .
Connect the upper arm and wheel knuckle.
Install a new nut and tighten to 70 Nm (52 lb.ft).
6 .
Secure the stabilizer bar link.
Install a new nut and tighten to 115 Nm (85 lb.ft).
7 .
Connect the tie-rod end ball joint.
Install a new nut and tighten to 70 Nm (52 lb.ft).
8 .
Install a new halfshaft retaining nut and lightly tighten.
9 .
Secure the brake hose retaining bracket to the wheel knuckle.
Tighten the bolt to 25 Nm (18 lb.ft).
10 .
