LR3/Disco 3
Tighten the new halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft.
11 .
Set the height distance between the centre of the halfshaft end and the edge of the fender trim to
466 mm (18.34'').
12 .
Tighten the lower arm bolts to 275 Nm (203 lb.ft).
Align the bolts to the marks made previously.
13 .
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
14 .
Carry out the wheel alignment procedure.
