LR3/Disco 3
204-535/3
Installer/depth setter lower arm rear bush
204-535/5
Removal
NOTE:
NOTE:
The bushings must be replaced in pairs, LH and RH sides.
Take note of the fitted position of the bush.
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheels and tires.
3 .
Remove the RH lower arm. For additional information, refer to
Lower Arm (60.35.02)
(Section 204-
01)
4 .
Remove the halfshaft retaining nut.
Discard the nut.
5 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Disconnect the LH stabilizer bar link.
Remove and discard the nut.