LR3/Disco 3
6 .
Release the brake hose bracket from the wheel knuckle.
Remove the bolt.
7 .
Loosen the tie -rod end ball joint retaining nut.
8 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature
failure of the joint.
Using the special tool, release the tie-rod end ball joint from the wheel knuckle.
Discard the nut.
9 .
CAUTION: To prevent the wheel knuckle falling outwards and disconnection of the halfshaft
inner joint, support the wheel knuckle.
Loosen the upper arm retaining nut.
10 .
