LR3/Disco 3
Shock Absorber and Spring Assembly (60.30.25/99)
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the fender splash shield. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
3 .
Disconnect the shock absorber and spring assembly from the lower arm.
Remove the nut and bolt.
4 .
Release the heat shield for access to the shock absorber and spring assembly upper mounting inner
nut.
Remove the three retaining bolts.
5 .
Remove the shock absorber and spring assembly.
Remove the three retaining bolts.
