LR3/Disco 3
Installation
1 .
Install the shock absorber and spring assembly.
Make sure the spring and shock absorber assembly top mounting to body mating faces
are clean.
Fit the nuts and tighten to 63 Nm (46 lb.ft).
2 .
Secure the heat shield.
Install the three retaining bolts and tighten to 10 Nm (7 lb.ft).
3 .
Connect the shock absorber and spring assembly to the lower arm.
Tighten the nut and bolt to 300 Nm (221 lb.ft).
4 .
Install the fender splash shield. For additional information, refer to
Fender Splash Shield (76.10.48)
(Section 501 -02)