LR3/Disco 3
Stabilizer Bar (60.10.01)
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheels and tires.
3 .
Disconnect both the stabilizer bar links from the stabilizer bar.
Remove the 2 nuts.
4 .
Remove the engine undershield. For additional information, refer to
Engine Undershield (76.10.50)
(Section 501 -02)
5 .
Remove the front axle crossmember.
Remove the 4 bolts.
6 .
Remove the stabilizer bar bushing.
Remove the 4 nuts.
Remove the stabilizer bar clamps.
