Land Rover Workshop Service and Repair Manuals

Installation  

7 . 

  Remove the stabilizer bar. 

Remove the stabilizer bar out through the LH side wheel arch.

1 . 

  Install the stabilizer bar. 

Install the stabilizer bar through the LH side wheel arch.

2 . 

  Install the stabilizer bar bushing. 

Install the stabilizer bar clamps.

Tighten the nuts to 115 Nm (85 lb.ft).

3 . 

  Install the front axle crossmember. 

Tighten the 4 bolts to 115 Nm (85 lb.ft).

4 . 

Install the engine undershield. For additional information, refer to 

Engine Undershield (76.10.50)

(Section 501 -02)

5 . 

  Connect both stabilizer bar links to the stabilizer bar. 

Tighten the nuts to 115 Nm (85 lb.ft).

6 . 

  Install the wheels and tires. 

Tighten the wheel nuts to 140 Nm (103 lb.ft).