Front Suspension Stabilizer Bar Link - LR3/Disco 3 (601002)
Stabilizer Bar Link (60.10.02)
Removal
Installation
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Remove the stabilizer bar link.
Remove the 2 nuts.
1 .
Install the stabilizer bar link.
Tighten the nuts to 115 Nm (85 lb.ft).
2 .
Install the wheel and tire.
