LR3/Disco 3
Lower Arm (64.35.54)
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Release the stabilizer bar link.
Remove and discard the retaining nut.
4 .
Loosen the 2 lower arm bolts.
5 .
Disconnect the shock absorber and spring assembly from the lower arm.
Remove the nut and bolt.
6 .
Release the parking brake cable.
7 .
Remove the 2 lower arm bolts.
8 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature
failure of the joint.
Release the knuckle from the lower arm.
Remove the bolt.
9 .
Remove the lower arm.