LR3/Disco 3
Installation
6 .
Remove the shock absorber and spring assembly.
1 .
Install the shock absorber and spring assembly.
Make sure the spring and shock absorber assembly top mounting to body mating faces
are clean.
Install the nuts but do not fully tighten at this stage.
2 .
Connect the shock absorber and spring assembly to the lower arm.
Tighten the nut and bolt to 300 Nm (221 lb.ft).
Tighten the nuts to 63 Nm (46 lb.ft).
3 .
Install the wheel and tire.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
