LR3/Disco 3
Upper Arm (64.35.60)
Removal
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
CAUTION: Always plug any open connections to prevent contamination.
Remove the brake tube.
Disconnect the 2 brake tube unions.
Remove the brake hose clips and release the hoses.
Release the brake tube from the clip.
4 .
Disconnect the height sensor link arm.
5 .
Release the wheel speed sensor lead.
6 .
RH side only: Release the brake pad wear indicator sensor lead.
7 .
Remove the upper arm.
Loosen the upper arm bolts.