LR3/Disco 3
Installation
11 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the
premature failure of the joint.
Disconnect the upper arm from the wheel knuckle.
Mark the position of the bolt in relation to the upper arm.
Remove the nut and bolt.
12 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the
premature failure of the joint.
Remove the wheel knuckle.
1 .
Clean the components.
2 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature
failure of the joint.
Install the wheel knuckle.
Locate the halfshaft.
3 .
Connect the upper arm and wheel knuckle.
Align the bolt to the marks made previously.
Tighten the nut and bolt to 175 Nm (129 lb.ft).