LR3/Disco 3
4 .
Using the special tools, install the halfshaft in the wheel hub.
5 .
Install a new halfshaft retaining nut and lightly tighten.
6 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature
failure of the joint.
Connect the lower arm to the wheel knuckle.
Tighten the nut and bolt to 175 Nm (129 lb.ft).
7 .
Connect the toe link.
Tighten the bolt to 175 Nm (129 lb.ft).
8 .
Install the wheel speed sensor.
Tighten the bolt to 9 Nm (7 lb.ft).
9 .
Locate the parking brake cable to the backplate.
Connect the cable to the brake shoe lever.
Tighten the coupling to 8 Nm (6 lb.ft).
Secure the parking brake cable to the lower arm.
10 .
Install the brake disc. For additional information, refer to
Brake Disc (70.12.33)
(Section 206-04)
11 .
Tighten the halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft.
12 .
Install the wheel and tire.
13 .
Carry out the wheel alignment procedure.