LR3/Disco 3
Tire Pressures - NAS Vehicles
General Specification
Recommended Lubricant
Torque Specifications
* Wheel nuts must be tightened by diagonal selection
CAUTION: * The standard size spare wheel tire should be inflated to the maximum gross vehicle weight
pressure and the pressure for the front or rear wheel locations must be adjusted accordingly if the wheel is to
be used under conditions other than with the vehicle loaded to maximum gross vehicle weight.
Loading condition
bars lbf/in² kPa
All conditions - Vehicle loaded up to maximum gross vehicle weight:
Front
2.3
33
230
Rear
2.9
42
290
Reduced size spare wheel
4.2
60
420
* Standard size spare wheel
2.9
42
290
CAUTION: * The standard size spare wheel tire should always be inflated to the highest loading
condition pressure which must be adjusted accordingly if the wheel is to be fitted to the front wheel locations.
Item
Make
Location
Tire low pressure sensor
Siemens On inside of wheel rim
Tire pressure sensor
initiator:
Front
Siemens Attached to the wheel arch liner adjacent to the front bumper
Rear
Siemens Attached to the wheel arch liner adjacent to the rear bumper
ECU
Siemens
Attached to the roof panel between the sun roofs and on the left hand side of the
interior light
Application
Land Rover Part No.
Wheel hub spigot RYL 105020
Description
Nm lb-ft
* Road wheel nuts
140 103
Tire low pressure sensor 6
4