LR3/Disco 3
Tire Pressure Monitoring System Front Antenna (86.53.16)
Removal
Installation
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the fender splash shield. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
3 .
Remove the tire pressure antenna.
Remove the 2 retainers.
1 .
To install, reverse the removal procedure.
2 .
Initiate a new tire pressure antenna using T4.