LR3/Disco 3
Tire Pressure Monitoring System Rear Antenna (86.53.17)
Removal
Installation
1 .
Remove the fender moulding. For additional information, refer to
Rear Quarter Panel Moulding
(76.43.55)
(Section 501-08)
2 .
Remove the fender splash shield.
Remove the 2 screws.
Remove the 6 retainers.
Disconnect the electrical connector.
3 .
Remove the tire pressure antenna.
Remove the 2 retainers.
1 .
To install, reverse the removal procedure.
