LR3/Disco 3
Front Shock Absorber and Air Spring Assembly (60.21.01.99)
Removal
NOTE:
Only the air spring being removed needs to be depressurised.
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the fender splash shield. For additional information, refer to
Fender Splash Shield
(76.10.48)
(Section 501-02)
3 .
Using T4, depressurize the air suspension. For additional information, refer to
Air Suspension
System Depressurize and Pressurize (60.50.38)
(Section 204-05)
4 .
Disconnect the shock absorber and air spring assembly from the lower arm.
Remove the nut and bolt.
5 .
Release the heat shield for access to the shock absorber and air spring assembly upper mounting
inner nut.
Remove the nut and two bolts.
6 .
Release the shock absorber and air spring assembly.
Remove the three retaining nuts.