LR3/Disco 3
Installation
7 .
CAUTION: Always plug any open connections to prevent contamination.
Release the shock absorber and air spring assembly and disconnect the air line.
8 .
Remove the shock absorber and air spring assembly.
9 .
Remove the Voss connector from the air line.
Remove and discard the collet and the union.
1 .
CAUTION: Make sure the new Voss connector is installed and fully tightened with the
alignment plug installed.
Install a new Voss connector to the air spring.
Tighten to 3.5 Nm (2.6 lb.ft)