LR3/Disco 3
Using the special tools, install the axle carrier bushing.
2 .
Install the axle carrier.
Tighten the M14 bolt to 105 Nm (77 lb.ft).
Tighten the new axle carrier bracket bolts to 80 Nm (59 lb.ft), then a further 60 degrees.
3 .
Install the axle carrier bushing heat shield.
4 .
Remove the axle support.
5 .
Install the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
