LR3/Disco 3
Axle Tube (47.10.42)
Removal
Installation
1 .
Remove the RH halfshaft. For additional information, refer to
Halfshaft RH (47.10.02)
(Section 205-
04)
2 .
Remove the axle tube.
Remove the bolt from the bushing.
Remove the 4 bolts.
Rotate and remove the axle tube.
Remove and discard the O-ring seal.
1 .
Install the axle tube.
Clean the component mating faces.
Install a new O-ring seal.
Tighten the 4 axle tube bolts to 50 Nm (37 lb.ft).
Tighten the axle tube bushing bolt to 63 Nm (46 lb.ft).
2 .
Install the RH halfshaft. For additional information, refer to
Halfshaft RH (47.10.02)
(Section 205-04)