LR3/Disco 3
6 .
Connect the upper arm and wheel knuckle.
Install a new nut and tighten to 70 Nm (52 lb.ft).
7 .
Secure the stabilizer bar link.
Install a new nut and tighten to 115 Nm (85 lb.ft).
8 .
Connect the tie-rod end ball joint.
Install a new nut and tighten to 70 Nm (52 lb.ft).
9 .
Install a new halfshaft retaining nut and lightly tighten.
10 .
Secure the brake hose retaining bracket to the wheel knuckle.
Tighten the bolt to 22 Nm (16 lb.ft).
11 .
Secure the LH stabilizer link.
Install a new nut and tighten to 115 Nm (85 lb.ft).
12 .
Tighten the new halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft.
13 .
Install the wheels and tires.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
14 .
CAUTION: Do not fill the differential with lubricant up to the filler plug. The filler plug is only
used to fill the differentail with lubricant, and not to act as a level indicator.
Fill the differential with the correct amount of lubricant. For additional information, refer
to
Differential Draining and Filling (54.15.02)
(Section 205-03)