LR3/Disco 3
Front Brake Disc Runout Check (70.12.15.01)
Special Service Tools
Dial indicator gauge holding fixture
100-053 (LRT-99-503)
1. Release the brake hose bracket from the wheel knuckle.
2.
LH side only: Disconnect the brake pad wear indicator sensor.
3. Remove the brake caliper lower bolt.
4. Remove the brake caliper upper bolt.
CAUTION: Brake discs must be renewed in pairs, unless one disc requires changing before 1000 miles
(1500 kilometers) from new.
l
Remove the bolt.
CAUTION: The brake pad wear indicator sensor is easily damaged. Do not use a lever to remove the
sensor. Use fingers only.