Land Rover Workshop Service and Repair Manuals

  Install the guide pins. 

4 . 

  Install the anchor plate. 

Tighten the bolts to 115 Nm (85 lb.ft).

5 . 

  Install the brake caliper housing and fit the top bolt. 

Tighten the bolt to 35 Nm (26 lb.ft).

6 . 

  Install the brake pads. 

Install the 2 clips.

7 . 

  Rotate the brake caliper downwards. 

Tighten the bolt to 35 Nm (26 lb.ft).

8 . 

  Connect the brake pad wear indicator sensor. 

9 . 

  Install the wheel and tire. 

Tighten the wheel nuts to 140 Nm (103 lb.ft).