LR3/Disco 3
Brake Caliper (70.55.25)
Removal
Published: Jan 17, 2005
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
CAUTION: The brake pad wear indicator sensor is easily damaged. Do not use a lever to
remove the sensor. Use fingers only.
RH side only: Disconnect the brake pad wear indicator sensor.
4 .
Remove the brake caliper lower bolt.
5 .
Remove the brake pads.
Rotate the brake caliper upwards.
Remove the two clips.
6 .
Disconnect the brake hose from the brake caliper.
Remove the union.
Remove and discard the two sealing washers.