Land Rover Workshop Service and Repair Manuals

Installation  

Install blanking caps to the exposed ports.

7 . 

  Remove the brake caliper upper bolt. 

8 . 

  Remove the brake caliper housing. 

1 . 

   WARNING: Do not use compressed air to clean brake components. Dust from friction materials 

can be harmful if inhaled.

  Clean the caliper housing and anchor plate using brake cleaning fluid. 

2 . 

  Install the brake caliper. 

3 . 

  Install the brake caliper upper bolt. 

Tighten the bolt to 35 Nm (26 lb.ft).

4 . 

  Connect the brake hose to the brake caliper. 

Remove the blanking caps from the ports.

Install new sealing washers.

Tighten the brake hose union to 28 Nm (21 lb.ft).

5 . 

  Install the brake pads. 

Install the two clips.

6 .