LR3/Disco 3
Installation
7 .
Remove the brake disc.
Remove the Torx screw.
1 .
Make sure the brake disc and hub mating surfaces are clean.
2 .
Install the brake disc.
Tighten the Torx screw to 35 Nm (26 lb.ft).
3 .
Install the brake caliper anchor plate. For additional information, refer to
Brake Caliper Anchor Plate
(70.55.29)
(Section 206-04)
4 .
Adjust the parking brake. For additional information, refer to
Parking Brake Shoe and Lining
Adjustment (70.40.11)
(Section 206-05)
5 .
Install fuse number 8 into the BJB.
6 .