LR3/Disco 3
Brake Vacuum Pump - 2.7L Diesel (70.50.19)
Removal
Published : Aug 5, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the engine cover. For additional information, refer to
Engine Cover - 2.7L Diesel (12.30.50)
(Section 501-05)
3 .
CAUTION: Always plug any open connections to prevent contamination.
Disconnect the brake booster vacuum line from the brake vacuum pump.
4 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
5 .
Remove the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
6 .
Remove the exhaust cross-over pipe LH support bracket.
Release the wiring harness.
Remove the three retaining bolts.
