LR3/Disco 3
7 .
Remove the exhaust cross-over pipe RH support bracket.
Release the wiring harness.
Remove the three retaining bolts.
8 .
Release the exhaust cross-over pipe from the LH exhaust manifold.
Remove the exhaust manifold heatshield retaining bolt.
Remove and discard the three retaining nuts.
9 .
Remove the exhaust cross-over pipe.
Remove the exhaust manifold heatshield retaining bolt.
Remove and discard the three retaining nuts.
Remove and discard the two gaskets.
10 .
Release the high pressure fuel supply line.
Remove the retaining bolt.