LR3/Disco 3
Rear Wheel Speed Sensor (70.65.31)
Removal
Published : Oct 13, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the wheel and tire.
3 .
Disconnect the anti-lock brake system (ABS) sensor electrical connector.
Release the wiring harness retaining clip.
4 .
Release the wheel speed sensor from the wheel knuckle.
Release the wiring harness.
Remove the retaining bolt.
5 .
Remove the wheel speed sensor.
Release the wiring harness from the 4 clips.