LR3/Disco 3
Installation
1 .
Install the power steering fluid cooler.
Position and secure in the clips.
2 .
Install the cooler line seperating clip.
3 .
Install the horn assembly.
Tighten the nut to 10 Nm (7 lb.ft).
4 .
Install the radiator deflector.
Secure with the clip.
5 .
Install the power steering fluid line and hose.
Clean the component mating faces.
Secure the hose with the clip.
6 .
Install the coolant expansion tank.
7 .
Install the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section 501-
08)
8 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
9 .
Fill and bleed the power steering system. For additional information, refer to
Power Steering System
Filling and Bleeding
(Section 211-00)
