LR3/Disco 3
Power Steering Fluid Reservoir - 2.7L Diesel (57.15.08)
Removal
Installation
Published : May 13, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the air cleaner assembly. For additional information, refer to
Air Cleaner (19.10.01)
(Section
303-12)
3 .
Remove the cooling fan shroud.
Release the coolant hose.
Release the 3 clips.
4 .
CAUTION: Before disconnecting or removing the components, ensure the area around the joint
faces and connections are clean. Plug open connections to prevent contamination.
NOTE :
Some fluid spillage is inevitable during this operation.
Remove the power steering reservoir.
Position a container to collect spillage.
Release the 2 clips.
Disconnect the 2 hoses.