LR3/Disco 3
Power Steering Pump - 4.4L (57.20.14)
Removal
Published : May 12, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the accessory drive belt. For additional information, refer to
Accessory Drive Belt (86.10.03)
(Section 303-05)
3 .
Remove the splash shield.
Remove the 4 clips.
4 .
CAUTION: Always plug any open connections to prevent contamination.
Disconnect the low pressure line.
Remove the power steering line bolt.
Allow the fluid to drain into a container.
Remove and discard the O-ring seal.
5 .
Disconnect the high pressure line at the steering pump union.
Remove and discard the O-ring seal.
6 .
Release the power steering line support bracket.
Remove the bolt.
