LR3/Disco 3
Steering Gear - 2.7L Diesel (57.10.01)
Special Service Tools
Ball joint separator (LRT-54-027)
205-754
Removal
All vehicles
Published : Feb 9, 2005
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the front wheels and tires.
4 .
NOTE :
Make sure the steering is in the straight ahead position.
Release the universal joint from the steering gear.
Remove and discard the bolt.
5 .
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature
failure of the joint.
Using the special tool, release both tie rod end ball joints.