LR3/Disco 3
Steering Gear Boot (57.10.29)
Removal
Installation
Published : Jul 18, 2004
1 .
Remove the tie-rod end. For additional information, refer to
Tie Rod End (57.55.07)
(Section 211-03)
2 .
NOTE :
Note the fitted position.
Remove the locknut.
3 .
Remove the steering gear boot.
Release the 2 clips.
1 .
Install the steering gear boot.
Clean the component mating faces.
Secure with the clips.
2 .
Install the locknut.
3 .
Install the tie-rod end. For additional information, refer to
Tie Rod End (57.55.07)
(Section 211-03)