LR3/Disco 3
Tie Rod End (57.55.07)
Special Service Tools
Ball joint separator
205-754 (LRT-54-027)
Removal
Published : Jul 19, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the front wheel.
3 .
Loosen the tie-rod end ball joint retaining nut.
4 .
Loosen the tie-rod end lock nut.
5 .
Using the special tool, release the tie-rod end ball joint from the wheel knuckle.
Remove and discard the tie rod end retaining nut.
6 .
Remove the tie-rod end, note the number of turns for installation.
