LR3/Disco 3
17 .
Position the steering column wiring harness aside.
Release the clip.
18 .
Disconnect the steering column intermediate shaft from the steering column.
Note the fitted position.
Remove the special bolt and discard the nut.
19 .
WARNING: Take care if releasing the adjustment lever when the column has been removed
from the vehicle. The spring is under a high tension, and if released, could cause personal injury.
Make sure fingers are clear from any areas, likely to be trapped.
CAUTION: If the steering angle sensor is damaged upon removal of the steering column, the
sensor MUST be replaced.
With assistance, remove the steering column.
Remove the 4 Torx bolts.
