Land Rover Workshop Service and Repair Manuals

Remove and discard the 2 shear bolts.

Disconnect the electrical connector. 

10 .    

NOTE :

  Do not disassemble further if the component is removed for access only. 

  Remove the ignition lock cylinder. 

Turn the ignition key to position 1. 

Insert a pin, not exceeding 2 mm diameter, through the access hole in the ignition lock 
cylinder housing to depress the plunger, and release the ignition lock cylinder. 

11 . 

  Remove the ignition switch. 

Depress the 2 clips.