LR3/Disco 3
Installation
1 .
Install the ignition switch.
Secure with the clips.
2 .
Install the ignition lock cylinder.
Turn the ignition key to position 1.
Locate into guides and depress the plunger.
3 .
Install the passive coil.
Secure the clips.
Connect the electrical connector.
4 .
Install the ignition switch assembly.
Tighten the shear bolts until the heads shear off.
Connect the electrical connector.
5 .
Install the steering column switch assembly.
Tighten the Torx bolts to 3 Nm (2 lb.ft).
6 .
Connect the clockspring and multifunction switch electrical connectors.
7 .
Install the steering column shrouds.
8 .
Install the steering wheel. For additional information, refer to
Steering Wheel (57.61.01)
(Section
211-04)