LR3/Disco 3
The oil pump is located on the RH rear underside of the cylinder block, contained within the ladder frame assembly, and
is secured by two bolts. The unit is driven by the jackshaft, via an intermediate shaft, and receives its oil feed from the
main gallery via drillings in the cylinder block. The intermediate shaft locates through the cylinder block and is connected
to the drive assembly, which is situated in the 'V' at the rear of the engine and held in place via a clamp. The oil pump
housing includes the oil pressure relief valve.
Engine Ladder Frame Assembly
Item Part Number
Description
1
-
Oil pump
2
-
Pick-up pipe adapter assembly
3
-
Intermediate shaft
4
-
Clamp
5
-
Drive assembly