LR3/Disco 3
The ladder frame is fitted to the lower cylinder block, via 20 bolts and 2 studs and nuts, to stiffen the base structure thus
helping to reduce Noise, Vibration and Harshness (NVH). The frame is made of high-pressure die cast aluminium.
Located in the bulkhead housing are eight crankshaft main bearing cap adjustment screws.
A gasket seals the joint between the bulkhead housing and the cylinder block.
A port for the oil level gauge tube is included in the casting on the LH side of the cylinder block.
Sump
Item Part Number
Description
A
-
69.8 mm minimum
1
-
Engine bulkhead housing
2
-
Crankshaft main bearing cap adjustment screw